Molecular Sieve 3A series
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1000 Kilogram|
|Delivery Time:||7 Days|
|Place of Origin:||china|
Model No.: TR3a100
Molecular Sieve 3A is an alkali metal aluminosilicate; Molecular sieve 3A is the potassium form of the type A crystal structure. Molecular sieve 3A adsorbs molecules with effective diameters small than 3 anstrom (0.3nm) such as water and exclude molecular.
Molecular Sieve 3A is made from zeolite powder 3A (>70%) and binder. Zeolite powder 3A is a potassium based type A zeolite, which is generated by replacing part of sodium cation in 4 angstrom sieve. Molecular sieve 3A is usually used for dehydration. Since it only adsorb molecule with diameter less than 3 anstroms. Molecular sieve 3A is a perfect adsorbent if you only want to remove water from gas mixture in most condition. Molecular Sieve 3A have the shape of beads and pallets.
Synonym: Zeolite 3A, Molsive 3A, Zeolith 3A
Typical Chemical Formula: 0,45 K2O. 0,55 Na2O. Al2O3. 2 SiO2. n H2O
CAS NO.: 1318-02-1
Silica-alumina ratio: SiO2/ Al2O3≈2
1. Zeolite molecular sieve 3A is used for drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadiene).
2. Zeolite molecular sieve 3A is used in deep desiccation of cracked petroleum gases, such as ethylene, propylene, butadiene, acetylene and natural gas, and of polar liquid, such as ethanol, LPG and solvent.
3. Zeolite molecular sieve 3A is used in drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required.
4. Zeolite molecular sieve 3A is used in drying of highly polar compounds, such as methanol and ethanol.
5. Zeolite molecular sieve 3A is used in drying of refrigerants (e.g. R22, R134a etc).
6. Zeolite molecular sieve 3A is used in dehydration of benzene, toluene, xylene and other solvents.
7. Zeolite molecular sieve 3A is used in static,( 55717321,non-regenerative) dehydration of insulating glass units.
Keep 3A molecular sieve in an air tight container until ready for use to avoid unintended moisture adsorption.
Regeneration & Activation:
Molecular sieve 3A can be regenerated or activated either thermal regeneration method(Thermal Swing Adsorption, TSA); To remove moisture from a 3A molecular sieve, a temperature of 200-230°C (390-570°F)is required. Molecular sieve 3A can also be regnerated or activated by lowering the pressure in the case of pressure swing processes (PSA). A properly regenerated or activated molecular sieve can give moisture dew points below -100°C. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Jiangsu Tongrui Environmental Protection Technology Development Co.,Ltd
Jiangsu Tongrui Environmental Technology Development Co., Ltd (Stock Code 837362)is a professional manufacturer of coconut shell activated carbon and sintered carbon block filter. The company adhering to the business philosophy of " Development with technology Innovation, Exist with high quality and benefit, Serve customer with sincerity". In 2010, the company introduced brand new facilities and talents from abroad to provide high quality products as well as a full set of product application solutions for customers. The main products including activated carbon series such as water and air purification activated carbon, high decolorization activated carbon, activated carbon special for polysilicon, vinylon, catalytic agent..etc and series sintered activated carbon block filters such as standard activated carbon cartridges and functional filters (Chloramine,antibiotic,arsenic,lead remove type).
- Company Name: Jiangsu Tongrui Environmental Protection Technology Development Co.,Ltd
- Representative: Pan Long
- Product/Service: Sintered Carbon Block Filter Cartridge , GAC UDF-10 Water Filter , Ultrafiltration Water Filter , Coconut Shell Activated Carbon , Coal Activated Carbon , Molecular Sieve
- Capital (Million US $): 30,000,000RMB
- Year Established: 2004
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 21% - 30%
- Total Annual Purchase Volume (Million US $): US$2.5 Million - US$5 Million
- No. of Production Lines: Above 20
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: Houbai Industrial Zone,Jurong Jiangsu P.R.China 212444
- Contact Person: Mr. andy wei
- Tel: 86-511-87521001
Premium Related Products